Additional hardware

Besides the specific zactrack hardware which is described here it is also necessary to use the following additional hardware to run zactrack.

• PoE switch to power and link all anchors into one network
  
  • Managed switch
    

  • >10W per port \\

    • Recommended products: https://www.luminex.be/products/gigacore/
      

    • CAT6 ethernet cables for the anchors and connections between switches
      
      
    • Leica DISTO S910 incl. tripod head and tripod
      https://lasers.leica-geosystems.com/disto/s910
      
      
    • WIFI Access Point with the this configuration