User Tools

Site Tools


Sidebar

zactrack manual

[[smart:start]] \\

System Overview
Safety Standards
Hardware Overview
Software Overview
Network
UWB Radiotracking


PREPARATIONS


ZACTRACK SETUP


Hardware


zactrack 3 APP


Autofunctions APP


[[manual:Tracking Server]]\\

zactrack site notice: Homepage

manual:connect

Connect the client to zactrack CORE

  1. Make sure the WIFI router is connected to zacNET
    Note: Please make sure you have set up the WIFI router correctly
    Set up the WIFI network


  2. Connect the zactrack tablet to the wifi network called “zactrack” (take the password from your login sheet)

  3. Open the zactrack APP on the tablet

  4. Tap on the top right corner to type in the zactrack CORE ip address

  5. Enter zactrack CORE ip address (Standard IP: 10.10.10.200) and tap “OK”

  6. If you are connected to zactrack CORE, the server sign will show the following sign





SUB TOPICS

manual/connect.txt · Last modified: 2022/11/10 13:53 by zvonek