User Tools

Site Tools


Sidebar

zactrack manual

[[smart:start]] \\

System Overview
Safety Standards
Hardware Overview
Software Overview
Network
UWB Radiotracking


PREPARATIONS


ZACTRACK SETUP


Hardware


zactrack 3 APP


Autofunctions APP


[[manual:Tracking Server]]\\

zactrack site notice: Homepage

manual:console

Set up the lighting console

It is possible to set up the lighting console and the zactrack CORE in 3 different setups depending on the conditions of the whole lighting network setup.

Add specific ZACFIXTURE channels on the lighting desk to control individual fixtures by zactrack.
Add specific ZACTAG channels on the lighting desk to control the settings of individual actors.

Grand MA 2 ## \\

DOWNLOAD of prepared GRAND MA 2 / zactrack Fixture Types

Lighting console setup 1

The lighting desk sends e.g. Universe 1 over sACN or ArtNet โ†’ zactrack receives this Universe, manipulates the DMX channels according to the positions of the Actors and outputs the data on a new universe e.g. Universe 11 directly to the sACN / ArtNET DMX node.

Console Setup 1

Lighting console setup 2

The lighting desk sends e.g. Universe 1 over sACN or ArtNet โ†’ zactrack receives this Universe, manipulates the DMX channels according to the positions of the Actors and outputs the data on a new universe e.g. Universe 11 back to the lighting desk.

Console Setup 2

Lighting console setup 3

The lighting desk sends e.g. Universe 1 Prio 100 over sACN โ†’ zactrack receives this Universe, manipulates the DMX channels according to the positions of the Actors and outputs the data on the same universe e.g. Universe 1 Prio 101. The sACN / DMX node should always listen to the highest priority.

Note: zactrack doesn't listen to its own universe output to prevent a sACN loop.

Console Setup 3

manual/console.txt ยท Last modified: 2022/11/08 15:35 by zvonek