User Tools

Site Tools


Sidebar

zactrack manual

[[smart:start]] \\

System Overview
Safety Standards
Hardware Overview
Software Overview
Network
UWB Radiotracking


PREPARATIONS


ZACTRACK SETUP


Hardware


zactrack 3 APP


Autofunctions APP


[[manual:Tracking Server]]\\

zactrack site notice: Homepage

manual:measure_points

Measure Points

  1. Tap in section “Points” to add and measure a new point

  2. Choose the type of points you want to add in the dropdown list



  3. Tap Disto and aim the laser of the Leica Disto S910 on the first target you want to measure

  4. Tap Measure
    Note: Tablet will BEEP after successful measurement and jump to the next number automatically

  5. Repeat the last 2 steps until all points are measured
    Note: If you can't reach all points from this the current location please Relocate measuring tool

  6. If all points are measured, tap Close

  7. Tap and tap upload to server
    Note: Upload to server will affect the current show

  8. shows successful upload

manual/measure_points.txt · Last modified: 2022/11/10 13:52 by zvonek