User Tools

Site Tools


Sidebar

zactrack manual

[[smart:start]] \\

System Overview
Safety Standards
Hardware Overview
Software Overview
Network
UWB Radiotracking


PREPARATIONS


ZACTRACK SETUP


Hardware


zactrack 3 APP


Autofunctions APP


[[manual:Tracking Server]]\\

zactrack site notice: Homepage

manual:mini_menu_tracking_server

Tracking Server

System settings about the tracking server can be accessed by

  • tapping the 3 dots menu in the top right corner to open the menu, and
  • tapping Tracking Server in that menu.



The information at the top left shows - the IP address of your Master anchor, - the connection state, and - the system state.

With the buttons on the right you can access multiple sub-functions.
The list at the bottom displays the anchors and trackers discovered.

Tracking Config

You can add some configurations here for the tracking server. Note: Only make changes here if you really know what you are doing!

The matrix displayed in the dialog popping up illustrates the UWB connection quality between the Master anchor and the other anchors.

The matrix displayed in the dialog popping up illustrates the UWB connection quality between trackers and anchors.

Discover Devices

Anchors & Trackers List

This list displays the anchors or trackers discovered.

By tapping on the tab Trackers, you can switch to the trackers list.
By tapping on the tab Anchors, you can switch to the anchors list.

In these lists you can see various information about the anchors/trackers.
You can update the firmware of an anchor or tracker by selecting it and tapping on the button Update Selected.

manual/mini_menu_tracking_server.txt ยท Last modified: 2022/11/04 14:32 by zvonek