Set up the LEICA Disto S910

Mount the Leica Disto S910 on the tripod mount and the tripod
Place the tripod on a position on stage where you are able to reach the origin, the X+ axis mark and as many anchors and cp calibration points as possible with the laser.
Level the tripod
Turn ON the Leica Disto S910 and open up a WIFI Hotspot on the Leica Disto S910
Press FUNC on the Leica Disto S910
Tap in the right bottom corner and press = on the keyboard
Note: If the Leica Disto S910 is connected correctly, the Leica calibration will start automatically now.
Level the Leica Disto S910
Connect the tablet to the Leica WIFI Hotspot
Open the zactrack APP on the zactrack tablet
Go to Show Editor and tap Points on the bottom
Tap Disto Status
Tap Discover to get the current ip address of the Leica S910 Disto and tap Ok
The Leica Disto S910 is now ready for measuring

zactrack