User Tools

Site Tools


Hardware Overview

zactrack Smart specific hardware


Product number: z00109201
Case: 9.5-inch rack 1U, Half-length
Form Factor: 9.5“ 1U chassis
Dimensions: X x X x X mm
Gross Weight: X kg
Power Supply: 100-250VAC, 50-60Hz, 50VA
Display: User Information
Ports: 2xLAN, 1xUSB, 1xPowercon thru In- & Output


Product number: z00101101
Material: ABS (IP 54)
Dimensions: 190 x 150 x 38 mm
Weight: 500 g
Power Supply: PoE IEEE802.3at & IEEE802.3af - CAT6 compatible with Neutrik etherCON
Mounting: Aluminium Plate for Clamps incl. rig for safety line

Technology: Radio RTLS (Real Time Location System) based on Decawave DWM1001
Accuracy: < 10 cm
Update Rate: 1 - 25 Hz
Connectivity: UWB (Ultra Wideband) channel 1 - 3, 3,5 - 4,5 GHz, 500 MHz bandwith
Default radio channel: channel 5 / 6,5 GHz
Radio regulations: Ultra-Wideband worldwide radio regulations

zacTag (Transmitter)

Product number: z00102101
Material: ABS
Dimensions: 47 x 33 x 7,5 mm
Weight: 15,4 g
Battery Operating Time: –> 8 hours in tracking mode / multiple days in standby mode
Charging: 2 hours (100%), 5V DC

zacTag Charger

Product number: z00102191
Material: ABS
Dimensions: x x x x x mm
Connection: USB C, 5V 1A

zactrack Puck

Product number: z00107101
Material: ABS
Dimensions: Xmm Ø x Xmm
Weight: Xg
Battery: LiPo –> 4 days under usage
Connection: USB C, UWB
Charging: 5V, 1.2A, 3 hours (100%)

Additional hardware

Besides the specific zactrack hardware it is also necessary to use the following additional hardware to run zactrack.

  • Android Tablet necessary for setup process
  • CAT5e/CAT6/CAT7 ethernet cables for the anchors and connections between switches

  • WIFI Access Point to connect the tablet with the ZacNet
This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information
smart/hardware_overview.txt · Last modified: 2020/04/21 09:52 by rosenberg