zactrack is able to send and receive the following network DMX protocols:

• ArtNet
• sACN
  Note: A zactrack mini system can send out one universe via physical XLR (which is marked with ).
  Additional universes can be sent via Ethernet (sACN, ArtNet).
  

• Tap on Universes in the Show Editor
  
  
• Tap to add a new universe
  
  
• Type in a unique name of the universe and tap on Create
  
  
• Choose Input or Output universe
  
  
• Choose ArtNet or sACN and type in the appropriate universe
  
  • ArtNet
    
    • Broadcast: 2.255.255.255
    • Unicast: Type in the IP address of the appropriate network listener (Ethernet/DMX Node)
      Note: Universe starts at 0.0
      
  • sACN
    • Multicast
      
    • Unicast: Type in the IP address of the appropriate network listener (Ethernet/DMX Node)
      
      
• Toggle In Merge and choose the appropriate IN Universe if you also have additional fixtures patched in the universe which you don't use for following.
  → All channels coming from this IN Universe will be rerouted to this created OUT universe
  
  
• Tap Ok
  
  
• Tap and tap upload to server
  Note: Upload to server will affect the current show
  
  
• shows successful upload

• Tap on Universes in the Show Editor
  
  
• Tap on on the right side of the specific universe you want to monitor
  Note: You can monitor both IN and OUTPUT universes