Add universes

Go to Show Editor
Tap in section “Universes” to add a new universe
Type in a unique name of the universe and tap on Create
Choose Input or Output universe
Choose ArtNet or sACN and type in the appropriate universe
- ArtNet
  - Broadcast: 2.255.255.255
  - Unicast: Type in the ip address of the appropriate network listener (Ethernet/DMX Node)
    Note: Universe starts at 0.0
- sACN
  - Multicast
  - Unicast: Type in the ip address of the appropriate network listener (Ethernet/DMX Node)
Toggle In Merge and choose the appropriate IN Universe if you have also additional fixtures patched in the universe which you don't use for following.
→ All channels coming from this IN Universe will be rerouted to this created OUT universe
Tap Ok

zactrack