Measure Points

Set up the LEICA Disto S910
Tap in section “Points” to add and measure a new point
Choose the type of points you want to add in the dropdown list
Tap Disto and aim the laser of the Leica Disto S910 on the first target you want to measure
Tap Measure
Note: Tablet will BEEP after successful measurement and jump to the next number automatically
Repeat the last 2 steps until all points are measured
Note: If you can't reach all points from this the current location please Relocate measuring tool
If all points are measured, tap Close
Tap and tap upload to server
Note: Upload to server will affect the current show
shows successful upload

zactrack