• Mount the Leica Disto S910 on the tripod mount and the tripod
  
  
• Place the tripod on a position on stage where you are able to reach the origin, the X+ axis mark and as many anchors and cp calibration points as possible with the laser.
  
  
• Level the tripod
  
  
• Turn ON the Leica Disto S910 and open up a WIFI Hotspot on the Leica Disto S910
  
  
• Press FUNC on the Leica Disto S910
  
  
• Tap in the right bottom corner and press = on the keyboard
  Note: If the Leica Disto S910 is connected correctly, the Leica calibration will start automatically now.
  
  
• Level the Leica Disto S910
  
  
  
• Connect the tablet to the Leica WIFI Hotspot
  
  
• Open the zactrack APP on the zactrack tablet
  
  
• Go to Show Editor and tap Points on the bottom
  
  
• Tap Disto Status
  
  
• Tap Discover to get the current ip address of the Leica S910 Disto and tap Ok
  
  
• The Leica Disto S910 is now ready for measuring

RELATED TOPICS

• Define origin on stage
• Relocate measuring tool
• Validate Points
• Measure Points