User Tools

Site Tools


pro:universes

Universes

zactrack is able to send and receive the following network DMX protocols:

  • ArtNet
  • sACN



Add universes

  1. Tap on Universes in the Show Editor

  2. Tap to add a new universe

  3. Type in a unique name of the universe and tap on Create

  4. Choose Input or Output universe

  5. Choose ArtNet or sACN and type in the appropriate universe
    1. ArtNet
      1. Broadcast: 2.255.255.255
      2. Unicast: Type in the ip address of the appropriate network listener (Ethernet/DMX Node)
        Note: Universe starts at 0.0
    2. sACN
      1. Multicast
      2. Unicast: Type in the ip address of the appropriate network listener (Ethernet/DMX Node)

  6. Toggle In Merge and choose the appropriate IN Universe if you also have additional fixtures patched in the universe which you don't use for following.
    → All channels coming from this IN Universe will be rerouted to this created OUT universe

  7. Tap Ok

  8. Tap and tap upload to server
    Note: Upload to server will affect the current show

  9. shows successful upload

Universe traffic monitoring

  1. Tap on Universes in the Show Editor

  2. Tap on on the right side of the specific universe you want to monitor
    Note: You can monitor both IN and OUTPUT universes

This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information
pro/universes.txt · Last modified: 2020/04/20 10:40 by rosenberg