Each zacTag you want to use with zactrack has to be registered in the show editor

1. Go to section “Actors” in the Show Editor 
   
   
2. Tap to add a new actor
   
   
3. Type in the name of the actor and tap create
   
   
4. Type in a unique DMX value
   Note: With this identification number you are able to assign this actor to a fixture on the console
   
   - Type in the unique Tracking ID of the tag
   
   - Pick the appropriate input control universe to change target height and speed presets from the console
   
   - Pick a color to identify the tag in the live view
   
   - Use “Merge” to use multiple physical zacTags as one
   Note: You are able to merge as many zacTags as you want.
   
   - Tap and tap upload to server
   NOTE: “Upload to server” will affect the current show
   
   - shows successful upload Name
   Type in the name of the actor
   DMX Value (1..255)
   DMX Value of which the zacTag will be assigned from the console.
   
   Example: DMX Value 1
   Lighting console sends the DMX Value 1 → zacTag is activated and fixture will follow the position of this particular zacTag
   Lighting console sends the DMX Value 0 → No zacTags activated → Fixture can be used as a standard fixture without tracking.
   Tracking ID
   Unique tracking ID of a zacTag. This ID is labeled on the back of each zacTag.
   Control Universe
   Input universe coming from the console Channel # (1…512)
   DMX start address of the patched zacTag fixture on the console
   Color
   Pick a random colour which represents the actor in the Live View
   Merge
   Toggle Merge to use multiple physical zacTags as one because of backup and steadiness reasons
   Note: You are able to merge as many zacTags as you want.**