User Tools

Site Tools


smart:measure_points

Measure Points

  1. Tap in section “Points” to add and measure a new point

  2. Choose the type of points you want to add in the dropdown list



  3. Tap Disto and aim the laser of the Leica Disto S910 on the first target you want to measure

  4. Tap Measure
    Note: Tablet will BEEP after successful measurement and jump to the next number automatically

  5. Repeat the last 2 steps until all points are measured
    Note: If you can't reach all points from this the current location please Relocate measuring tool

  6. If all points are measured, tap Close

  7. Tap and tap upload to server
    Note: Upload to server will affect the current show

  8. shows successful upload

smart/measure_points.txt · Last modified: 2020/08/31 13:37 by rosenberg