Protocol Details
zactrack can send and receive a variety of protocols. Below you can find the details of each one including transport layer, port, available IP address and any additional Information.
You can configure individual protocol details such as port numbers and update rates in the System Settings dialog in the zactrack App. For more information go to this page.
For additional information on configuring IP addresses and Ethernet connections for these protocols see network settings.
Transport Layer -UDP - Multicast
Standard Port - 5568
IP Addresses 192.168.x.x, 169.254.x.x, 10.x.x.x
Additional Information
zactrack can work and handle Universe based priority levels and uses LTP (Latest Takes Precedence) when receiving sACN universes from multiple sources with the same priority.
Transport Layer - UDP Broadcast
Standard Port - 6454
IP Addresses 2.x.x.x, 10.x.x.x
Additional Information
zactrack supports Art-Net 1, 2. Art-Net is a royalty free protocol developed by Artistic License
Transport Layer UDP Multicast
Standard UDP Port 56565
IP Addresses 236.10.10.10
Additional Information
PosiStageNet or PSN is an open protocol developed by MA Lighting and VYV Corporation
Open Sound Control (OSC) is a protocol used for communication between computers, sound synthesizers, and other multimedia devices.
Transport Layer UDP Multicast
Standard Port - 7777
IP Addresses 192.168.x.x
Additional Information
zactrack can send relative or absolute XYZ coordinates, ranges or grid point Information via OSC.