Protocol Details
zactrack can send and receive a variety of protocols. Below you can find the details of each one including transport layer, port, available IP address and any additional Information.
You will also find configuration lines that can be used within the the System Config to change network settings. For the steps to add these lines to the System Config go to this page.
For additional information on configuring IP addresses and Ethernet connections for these protocols see network settings.
Transport Layer -UDP - Multicast
Port - 5568
IP Addresses 192.168.x.x, 169.254.x.x, 10.x.x.x
Additional Information
zactrack can work and handle Universe based priority levels
Property | Configuration Line |
---|---|
Enable Disable | network.sacn.enabled=true network.sacn.enable=false |
Change Send Port | network.sacn.send.port=5568 |
Change Send Port | network.sacn.send.port=5568 |
Transport Layer - UDP Broadcast
Port - 6454
IP Addresses 2.x.x.x, 10.x.x.x
Additional Information
zactrack supports Art-Net 1, 2. Art-Net is a royalty free protocol developed by Artistic License
Property | Configuration Line |
---|---|
Enable Disable | network.artnet.enabled=true network.artnet.enable=false |
Change Send Port | network.artnet.send.port=6454 |
Change Send Port | network.artnet.send.port=6454 |
Transport Layer UDP Multicast
UDP Port 56565
IP Addresses 236.10.10.10
Additional Information
PosiStageNet or PSN is an open protocol developed by MA Lighting and VYV Corporation
The Multicast address and port number can be changed
Property | Configuration Line |
---|---|
Enable Disable | network.psn.enabled=true network.psn.enabled=false |
Change Send Port | network.psn.send.port=56565 |
Change Receive Port | network.psn.send.port=56565 |
Change Send IP Address | network.psn.send.ip=236.10.10.10 |
Change Receive IP Address | network.psn.send.ip=236.10.10.10 |
Open Sound Control (OSC) is a protocol used for communication between computers, sound synthesizers, and other multimedia devices.
Transport Layer UDP Multicast
Port - 7777
IP Addresses 192.168.x.x
Additional Information
zactrack can send relative or absolute XYZ coordinates, ranges or grid point Information via OSC.
Property | Configuration Line |
---|---|
Change Send Port | osc.port=7777 |
Change Send IP Address | osc.ip=192.168.0.205 |